Bachin laser engraving machine D8-1720 » Relevant information
0.Preliminaries
Welcome to Bachinmaker! This is the user guide for the Bachin D8-4050P laser engraving machines. This guide is here to help you get started. There is a lot here–covering how you set up and use the machine, and pointing you towards additional resources for the future.
1.Software »
download from :http://www.bachinmaker.com/update/litefire/setup.exe
2.User Guide
video on YouTube :https://www.youtube.com/watch?v=BeeOugWwkeU
or just watch the video from here:
3.Connected all the cables–follow the picture:
4. Installing Engraver Master: you can find the setup.exe from the USB flash driver or download from the wiki.
After download the driver :setup.exe ,run this file then here comes an icon on the computer desktop .
5.Engraver Master anatomy:
See the top menu of the interface ,there have :Print Picture,NC Sender,Quick Tagging and Device Settings.
Print Picture– Suitable for gray style , and it's very slowly , so if you really need to engraving a gray style picture,we suggest you'e better use another software which more faster then this one .Here»http://www.bachinmaker.com/update/laserprint/setup.exe
NC Sender–Automatically generate path files without trans-coding, fast speed and good effect.Recommended!Prefer this engraving mode.
Quick Tagging-here is for engraving the single line font .
Device Settings–setting the speed,laser powder ,machine type and so on. Don't forget click on Save Settings when change any settings.
Now , it is ready to start the first engraving . Please pay attention to protect your eyes and use protective glasses.
You should cut of the power when not use the machine .
Sometimes ,the software maybe disconnected ,don't worry ,Turn off and restart,or delete it and reinstalling again.
Can not use benbox software.
Links: