✎ bachin_d8-4050p [Bachinmaker]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**Bachin laser engraving machine D8-4050P >> Relevant information**

**0.Preliminaries**
Welcome to Bachinmaker!
This is the user guide for the Bachin D8-4050P laser engraving machines. This guide is here to help you get started. There is a lot here–covering how you set up and use the machine, and pointing you towards additional resources for the future.

**1.Software >> Engraver Master** 
  download from ：http://www.bachinmaker.com/update/litefire/setup.exe
  
**2.Assembly video on YouTube** :https://www.youtube.com/watch?v=jzn5mif5Ldo&feature=youtu.be

More assembly details (picture):http://bachinmaker.com/wiki/doku.php?id=laser_machine_assembly_instruction

or just watch the video from here:
{{youtube>jzn5mif5Ldo?medium}}

**3.Connected all the cables--**follow the picture:


{{:img_3233.png?600|}}

**4.** **Installing Engraver Master:**you can find the setup.exe from the USB flash driver or download from the wiki.

After download the driver :**setup.exe** ,run this file then here comes an icon on the computer desktop .

{{:qq图片20171023150935副本.jpg?100|}}

the interface:


{{:001.png?600|}}

**5.Engraver Master anatomy:**

See the top menu of the interface ,there have :Print Picture,NC Sender,Quick Tagging and Device Settings.

//**Print Picture--**// Suitable for gray style , and it's very slowly , so if you really need to engraving a gray style picture,we suggest you'e better use another software which more faster then this one .Here>>http://www.bachinmaker.com/update/laserprint/setup.exe

//**NC Sender**//--Automatically generate path files without trans-coding, fast speed and good effect.Recommended！Prefer this engraving mode.
{{:02副本.jpg?600|}}


//**Quick Tagging**//-here is for engraving the single line font .

//**Device Settings**//--setting the speed,laser powder ,machine type and so on.
Don't forget click on Save Settings when change any settings.
{{:002.png?600|}}

Now , it is ready to start the first engraving . 
Please pay attention to protect your eyes and use protective glasses.

You should cut of the power when not use the machine .

Sometimes ,the software maybe disconnected ,don't worry ,Turn off and restart,or delete it and reinstalling again.

Can not use benbox software.
Supported the system:windows XP ,windows 7/8/10. Can not supported MAC.

**6.if you feel that the feet of the machine are not level, you can put a sponge paper or other thin object on the foot of the machine.
**
see the follow picture:

{{:img_3495.jpg?600|}}

Links: 

  * [[carve_photos_at_fastest_speed|Carve photos at fastest speed]]
  * [[solve_laser_problems|How to solve the Laser Problems]]
  * [[solve_motor_problem|How to solve the Motor Problems]]
  * [[d8_4050_1720_laser_assembly_problem|D8-4050P Assembly problems]]
  * [[software_interface_problem|Windows7 Display Problem]]
  * [[install_end_stop_switch_laser_machine|Install End Stop Switch for Laser Machine]]
  * [[buy_new_belts|Buy new belts]]
  * [[avoid_white_lines|How to avoid white lines]]
  * [[update_firmware|How to Update Firmware on Board]]
  * User [[light_burn|Light Burn]] application.
  * [[4050_stop_half_the_project|4050 Laser stop half the project]]