====Bachin Arduino Nano Flash Tool====

If you buy a new pcs Arduino Mega32p Nano Module for your laser/cnc/drawing machine control board.

You must flash a Firmware matching the machine into it.

https://www.amazon.com/ATmega328P-Microcontroller-Board-Cable-Arduino/dp/B00NLAMS9C/ref=sr_1_8?crid=3HXLAL198OM4H&dchild=1&keywords=arduino+nano+v3.0&qid=1590297299&sprefix=arduino+nano%2Caps%2C625&sr=8-8

{{:nano.png?nolink|}}





It's easy to do.

STEP 1:

Download a software toolkit

{{ :bachinflash.zip |}}

WARNINGS
  - This tool empties everything in the chip and cannot be restored.
  - Applicable only to the control board of BACHIN MAKR, if used on other control boards, take risks on your own.
  - Only user for Atmel328P based control board.

STEP 2:

Download a firmware file with .hex suffix.
Please select the right firmware matching your machine.
If you flashed a wrong firmware, the machine will not work, or very strange.
To correct the problem, just flash the correct firmware.  Please download a firmware according to the model keyword.


{{ :nano_328p_1720_4050_new.zip |}} 

{{ :nano_328p_ta4.zip |}}

{{ ::nano-328p-st2039.zip |}}

STEP 3:

Connect the Nano Module to your PC with a USB cable.


{{:1575601911559.jpg?nolink|}}


STEP 4:

Run Flash.exe, click the only button, select the firmware file.


{{:BachinFlash.png?nolink|}}

{{:flashing.png?nolink|}}

You should get a "Done" message when it success.